Eckel Diesel Power Unit
Compact Frame- 4 or 6 Cylinder Engine
- Electric or Air Start
- Electric or Hydraulic Throttle
- Compact Frame - 4 Point Lift
- Air Blast Heat Exchanger
- Overspeed Shut-Down Valve
- High or Low - Selection Valve
- Cold Weather Models
- Low Temperature Oil
- High Ambient Temp Models
- Configurations for Hazardous Locations
Diesel Power Unit
Eckel's diesel power units provide maximum power output from a compact and rugged design. Capable of delivering a maximum of 65 GPM at pressures up to 1,000 psi and 27 GPM at pressures from 1,000 to 2,500 psi for tubing tongs and other applications. Our units meet the industry's highest standard through every step of design, manufacture, and quality control. Expendable parts are specially selected from the best-recognized brands for easy replacement in any part of the world. Hydraulic power units are available in standard or custom-designed configurations.
The skid mounted diesel power unit comes complete with:
- 4 or 6 Cylinder Engine
- Removable Hose Basket with Solid Bottom Plate and Drain Holes
- 4-Point Lifting Frame - 3 in. (76.2 mm) Lift Eye Holes
- Fork Lift Tubes in Skid Base
- Air Blast Heat Exchanger with Hydraulic Fan Motor
- 140 U.S. Gallon Hydraulic Reservoir
- 36 U.S. Gallon Diesel Reservoir
- In-Tank Return Filter
- Suction Strainer
- Selectable Flow Output - Full Flow and Reduced Flow
- V-belt guard, Scaleplate Sealed Against Water Entry, Oil Bath Air Cleaner, Pre-cleaner, Panel w/ Oil Pressure Gauge, Engine Temperature Gauge, Tachometer and Engine Shut-Down Pull Knob, V-Belt Failure Shutdown, Overspeed Shut-Down Valve (Chalmatic) with Emergency Stop Cable, Automatic Operation During Overspeed Conditions, Pull Cable for Manual Operation - Emergency Stop Only, Sentinel Shutdown System (oil pressure, temperature), Spark Arrestor w/ Rain Cap and Air starter lubricator & valve
Hydraulic Throttle Component
4 or 6 Cylinder Diesel Engine Complete with:
Diesel Power Unit - 4 Cylinder - Single Point LIft | |
Width | 56 in. (1422.4 mm) |
Length | 90 in. (2286 mm) |
Height | 72 in. (1828.8 mm) |
Weight[1] | 6,350 lbs (2880.3 Kgs.) |
Hydraulic Output | |
Full Flow | 65 GPM @ 0-1,000 PSI (0-69 bar) |
Full Flow | 27 GPM @ 1,000 - 2,500 PSI (69-173 bar) |
Reduced Flow | 27 GPM @ 0-2,500 PSI (0-173 bar) |
RPM Rating | 2,100 RPM |
[1]Weight Approximate
Based in United States
Local time:
Date:
Sales Question or Technical Support?
Eckel Sales Representative
8035 North County Road WestOdessa, TX 79707
Ph: +1(432) 362-4336
Fax: +1(432) 362 1827
sales@eckel.com