Eckel 4-1/2 CMT-10
Tubing Tong: 1.050" - 4-1/2"
Maximum Gripping Coverage 342°
 |
 |
 |
|
 |
 |
 |
Alternative Image on Click
Rollover to Zoom or Click to Enlarge
Overview
The Eckel Closed Mouth Tongs uses three sliding heads with each head equipped with a wide angle wrap-around die. This provides a maximum gripping area of 342 degrees; on the pipe. The CMT's utilizes the Hydra-Shift shifting technology which allows the operator to shift from high to low speed without stopping the tong. Reversing the pipe rotation is effortless and done simply by pulling the tong control in the opposite direction. There is no need to physically take out the jaws and turn them over as there is with other brands of closed head tongs. The CMT's also come with an optional backup that utilizes the same heads/dies as the tong.
Specifications
Eckel 4-1/2 CMT-10
| Tong Specifications | |
| Capacity | 1.050 - 4-1/2 in (26.67 - 114.3 mm) |
| Drill Pipe | Up to 5 in. (127.0 mm) |
| Space Rquired on Pipe | 12 in. (304.8 mm) |
| Dimensions | 25 x 57-1/2 in. (635.0 x 1460.5 mm) |
| Weight [1] | 1,250 lb (567.0 kg) |
| Handle Length | 44 in. (1117.6 mm) |
| CMT-10 Specifications | |
| Maximum Torque @ 2,000 psi (138 bar) | |
| Low-Low | 11,600 ft-lb (15727 Nm) |
| Low-High | 5,380 ft-lb (7294 Nm) |
| High-Low | 3,530 ft-lb (4786 Nm) |
| High-High | 1,640 ft-lb (2224 Nm) |
| Maximum RPM @ 40 GPM (151.4 LPM) | |
| Low-Low | 17 rpm |
| Low-High | 55 rpm |
| High-Low | 36 rpm |
| High-High | 119 rpm |
| Backup Specifications | |
| Backup Type | Manual Cam Backup |
| Capacity | 1.050 - 5 in. (26.7 - 127.0 mm) |
| Dimensions [2] | 25 x 57-1/2 in. (635.0 x 1460.5 mm) |
| Weight [1][2] | 1,700 lb (771.1 kg) |
| Load Cell Type | Compression or Tension |
| Handle Length[2] | 44 in. (1117.6 mm) |
[1]Weight Approximate, [2]Tong and Backup
Resources
Product Questions
Quote & Inquires
Request Operation Manual
Eckel a leading world-wide manufacturer of hydraulic power tongs was founded in 1958 when Emery L. Eckel revoultionized hydraulic power tongs after chalking out his design on the floor. Since then Eckel manufactures over 36 models of hydraulic power tongs for the oil & gas industry. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing, backups, hydraulic power units, and tong positioning equipment.
Contact us for further information on how we can improve your tubular experience.
