Eckel 4-1/2 UHT-20
Tubing Tong / Drill Pipe Tong 1.050"-4-1/2"
Light weight and rugged!
 |
 |
 |
|
 |
 |
 |
 |
Alternative Image on Click
Rollover to Zoom or Click to Enlarge
Overview
The Model 4-1/2 UHT-20 is rugged, light weight and capable of providing 10,000 ft-lb of torque at 2,500 PSI. The tong will handle pipe from 1.050 inches to 4-1/2 inches. A notable feature is the Eckel patented quick-change sliding head biting system that compensates for worn or under gauge pipe. Also available with an optional rod package for sizes 5/8 inch through 1-1/8 inches and your choice of manual type or hydraulic type backups. Slide heads with rig dies are available for handling drill pipe tool joints.
Specifications
Eckel 4-1/2 UHT-20
| Tong Specifications | |
| Capacity | 1.050 - 4-1/2 in. (26.67 - 114.3 mm) |
| Rod Size | 5/8 - 1-1/8 in. (15.88 - 28.58 mm) |
| Dimensions | 23-1/2 x 42-1/2 in. (596.9 x 1079.5 mm) |
| Handle Length | 24 in. (610 mm) |
| Weight[1] | 1000 lb (453.6 kg) |
| Maximum Torque @ 1,470 PSI (101.4 bar) | |
| High | 2,300 ft-lb (3118 Nm) |
| Low | 8,000 ft-lb (10847 Nm) |
| Maximum Torque @ 2,000 PSI (138 bar) | |
| High | 2,600 ft-lb (3525 Nm) |
| Low | 10,000 ft-lb (13558 Nm) |
| Maximum Torque @ 2,500 psi (172 bar) | |
| High | 3,000 ft-lb (4067 Nm) |
| Low | 12,000 ft-lb (16270 Nm) |
| Maximum RPM @ 65 GPM (246 LPM) | |
| High | 124 rpm |
| Low | 32 rpm |
| Maximum RPM @ 50 GPM (189 LPM) | |
| High | 95 rpm |
| Low | 25 rpm |
| Maximum RPM @ 40 GPM (151 LPM) | |
| High | 76 rpm |
| Low | 20 rpm |
| Backup Specifications | |
| Backup Type | Tri-Grip® |
| Capacity | 1.050 - 5-9/16 in (26.7 - 141.3 mm) |
| Dimensions[2] | 28.5 x 45 in. (635.0 x 1143.0 mm) |
| Weight[1][2] | 1,800 lb (648.6 kg) |
| Load Cell Type | Compression or Tension |
| Handle Length[2] | 25 in (635.0 mm) |
[1]Weight Approximate, [2]Tong and Backup
Resources
Product Questions
Quote & Inquires
Request Operation Manual
Eckel a leading world-wide manufacturer of hydraulic power tongs was founded in 1958 when Emery L. Eckel revoultionized hydraulic power tongs after chalking out his design on the floor. Since then Eckel manufactures over 36 models of hydraulic power tongs for the oil & gas industry. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing, backups, hydraulic power units, and tong positioning equipment.
Contact us for further information on how we can improve your tubular experience.
