Eckel 2-1/6 Hydra-Shift® DTT
Tubing Tong: 1.050" - 2-1/16"
The lighter, smaller 2-1/16 HS Tong. Less is definitely more.
 |
 |
|  |
 |
 |
 |
Alternative Image on Click
Rollover to Zoom or Click to Enlarge
Overview
The Oil & Gas Industry has needed a specialized power tong with an integral backup. This tong is sized small enough and has the right amount of controlable torque output. It is designed so as to properly grip small tubulars such as small macaroni type strings of tubing.This tong incorporates Eckel's Hydra-Shift technology for smooth tranfers of power and speed directly to the tubular. Special built in torque control valving allows the operator to pre-set the maximum desired torque for the connection. This tong also incorporates our new Radial Lock Door. If you are looking for a tong for this lighter type of word look no further.
Specifications
Eckel 2-1/16 Hydra-SHift DTT
| Tong Specifications | |
| Capacity | 1.050 - 2-1/16 in (26.67 - 52.4 mm) |
| Dimensions | 16 x 41.5 in. (406.4 x 1054.2 mm) |
| Weight[1] | 500 lb (226.8 kgs) |
| Maximum Torque | |
| @ 1000 PSI (69 bar) | 2,500 ft-lb (3389.5 Nm) |
| @ 1200 PSI (83 bar) | 3,200 ft-lb (4338.6 Nm) |
| Gear Ratio: | 20.20:1 |
| Maximum RPM @ 40 GPM (152 LPM) | |
| High | 80 rpm |
| Low | 37 rpm |
| Handle Length | 15.6 in. (396.2 mm) |
| Backup Specifications | |
| Backup Type | Tri-Grip®® |
| Capacity | 1.050 - 2.460 in (26.7 - 62.5 mm) |
| Dimensions[2] | 23 x 41.5 (584.2 x 1054.2 mm) |
| Weight [1][2] | 800 lb (362.9 kg) |
| Load Cell Type | Compression or Tension |
| Handle Length[2] | 19 in. (482.6 mm) |
[1]Weight Approximate, [2]Tong and Backup
Resources
Product Questions
Quote & Inquires
Request Operation Manual
Eckel a leading world-wide manufacturer of hydraulic power tongs was founded in 1958 when Emery L. Eckel revoultionized hydraulic power tongs after chalking out his design on the floor. Since then Eckel manufactures over 36 models of hydraulic power tongs for the oil & gas industry. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing, backups, hydraulic power units, and tong positioning equipment.
Contact us for further information on how we can improve your tubular experience.
