Eckel 36 UHT
Casing Tong: 16" - 36"
Big and Capable!!
 |
 |
 |
|
 |
 |
Alternative Image on Click
Rollover to Zoom or Click to Enlarge
Overview
The big, capable Model 36 UHT easily produces 100,000 ft-lb of torque for makeup or break-out operations involving casing in sizes 16 inches through 36 inches. Weighing approximately 13,000 pounds, this casing tong is 81 inches wide and 135 inches in length. A two-speed motor delivers 16 RPM in high, 3-1/2 RPM in low range, both at 70 GPM.
Specifications
Eckel 36 UHT
| Tong Specifications | |
| Capacity | 16 - 36 in. (406.4 - 914.4 mm) |
| Dimensions | 81 x 135 in. (2057.4 x 3429.0 mm) |
| Weight[1] | 13,000 lb (5896.7 kg) |
| Maximum Torque @ 2,500 psi (172 bar) | |
| High | 21,800 ft-lb (29557 Nm) |
| Low | 100,000 ft-lb (135582 Nm) |
| Maximum RPM @ 65 GPM (246 LPM) | |
| High | 16 rpm |
| Low | 3.5 rpm |
| Handle Length | 77 in. (1955.8 mm) |
[1]Weight Approximate, [2]Tong and Backup
Resources
Product Questions
Quote & Inquires
Request Operation Manual
Eckel a leading world-wide manufacturer of hydraulic power tongs was founded in 1958 when Emery L. Eckel revoultionized hydraulic power tongs after chalking out his design on the floor. Since then Eckel manufactures over 36 models of hydraulic power tongs for the oil & gas industry. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing, backups, hydraulic power units, and tong positioning equipment.
Contact us for further information on how we can improve your tubular experience.
