Eckel Manufacturing Co., Inc.

Eckel 22 Hydra-Shift

Casing Tong: 7" - 22"

Smooth torquing and capable of most demanding applications.

  • 72,000 ft-lbs (97619 Nm) Maximum Torque
  • Hydra-Shift Speed Shifting
  • Two Speed Motor - Two Speed Gear Train
  • Self Aligning Throat
  • Optional Cam Backup
  • Hydra-SHift / Variable Shift - Click for more information Pivot Heads - Click for more information Cam Backup - Click for more information Coarse Tooth Dies - Click for more information
    Fine Tooth Dies - Click for more information Torque Control System - Click for more information

          

    Alternative Image on Click


    Rollover to Zoom or Click to Enlarge

    Overview

    For casing up to 22 inches, here's a tong that has strong torquing ability and will handle pipe sizes down to 7 inch. The tong utilizes a two-speed motor and a two-speed gear train, allowing the operator to correctly adjust the tong for the optimum torque and RPM needed for the current application. Maximum torque for the 22 Hydra-Shift is 72,000 ft-lb.

    Specifications

    Eckel 22 Hydra-Shift

    Tong Specifications
    Capacity7 - 22 in. (177.8 - 558.8 mm)
    Dimensions47 x 75 in. (1193.8 x 1905.0 mm)
    Weight[1]4,350 lb (1973.1 kg)
    Maximum Torque @ 2,500 psi (172 bar)
    High-High5,500 ft-lb (7457 Nm)
    High-Low11,000 ft-lb (14914 Nm)
    Low-High38,000 ft-lb (51521 Nm)
    Low-Low72,000 ft-lb (97619 Nm)
    Gear Ratio
    High3.71:1
    Low27.86:1
    Maximum RPM @ 65 GPM (246 LPM)
    High-High54 rpm
    High-Low33 rpm
    Low-High8.5
    Low-Low4.5
    Handle Length45 in. (1143.0 mm)

    Backup Specifications
    Backup TypeHydraulic Cam Backup
    Capacity7 - 23 in. (177.8 - 584.2 mm)
    Dimensions[2]55 x 81 in. (1397.0 x 2057.4 mm)
    Weight[1][2]8,000 ft-lb (3628.7 kg)
    Load Cell Type Compression or Tension
    Handle Length[2]45 in. (1143.0 mm)

    [1]Weight Approximate, [2]Tong and Backup

    Resources

    Resources

    Product Questions

    Quote & Inquires

    Request Operation Manual

    Eckel a leading world-wide manufacturer of hydraulic power tongs was founded in 1958 when Emery L. Eckel revoultionized hydraulic power tongs after chalking out his design on the floor. Since then Eckel manufactures over 36 models of hydraulic power tongs for the oil & gas industry. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing, backups, hydraulic power units, and tong positioning equipment.

    Contact us for further information on how we can improve your tubular experience.