Views
Features

2-1/16 Hydra-Shift®

Tubing Tong: 1.050 - 2-1/16 in.

The lighter, smaller 2-1/16 HS Tong. Less is definetely more.
  • 3,200 ft-lbs (4338.6 Nm) Maximum Torque
  • Hydra-Shift® Speed Shifting
  • No Clutching
  • Quick Changing Sliding Heads
  • Self Aligning Throat
  • Optional: Wedge Drive Tri-Grip® Backup
Features:
Share:
Product Description

2-1/16 Hydra-Shift® DTT Tong

The Oil & Gas Industry has needed a specialized power tong with an integral backup. This tong is sized small enough and has the right amount of controlable torque output. It is designed so as to properly grip small tubulars such as small macaroni type strings of tubing.

This tong incorporates Eckel's Hydra-Shift technology for smooth tranfers of power and speed directly to the tubular. Special built in torque control valving allows the operator to pre-set the maximum desired torque for the connection. This tong also incorporates our new Radial Lock Door. If you are looking for a tong for this lighter type of word look no further.

Tri-Grip® Backup

The Tri-Grip® Backup are industry standard for reliable make-up and break-out of tubular connections that are optionally supplied with Eckel tongs. Utilizing two hydraulic cylinders and a three head arrangement insures a slip-free operation. The backup is suspended at an adjustable level below the power tong by means of three hanger legs and allowing the backup to remain stationary while the power tong moves vertically to compensate for thread travel of the connection. The Tri-Grip® uses two pivoting heads and one stationary. The Eckel Tri-Grip Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit® dies or Pyramid Fine Tooth dies for making up other types of tubulars.

Technical Specifications
Tong Specifications
Capacity 1.050 - 2-1/16 in (26.67 - 52.4 mm)
Dimensions 16 x 41.5 in. (406.4 x 1054.2 mm)
Weight[1] 500 lb (226.8 kgs)
Maximum Torque
@ 1000 PSI (69 bar) 2,500 ft-lb (3389.5 Nm)
@ 1200 PSI (83 bar) 3,200 ft-lb (4338.6 Nm)
Maximum RPM @ 40 GPM (152 LPM)
High 80 rpm
Low 37 rpm
Handle Length 15.6 in. (396.2 mm)
Backup Specifications
Backup Type Tri-Grip®
Capacity 1.050 - 2.460 in (26.7 - 62.5 mm)
Dimensions[2] 23 x 41.5 (584.2 x 1054.2 mm)
Weight [1][2] 800 lb (362.9 kg)
Load Cell Type Compression or Tension
Handle Length[2] 19 in. (482.6 mm)

[1]Weight Approximate, [2]Tong and Backup

Product Support

Based in United States

Local time:

Date:


Sales Question or Technical Support?

Eckel Sales Representative

8035 North County Road West
Odessa, TX 79707

Ph: +1(432) 362-4336
Fax: +1(432) 362 1827
sales@eckel.com