Saturday, September 04, 2010 - 03:40:05     Home  |  Contact Us  |  Site Map    
  Product Details
  Eckel Product Catalog
  Tubing Tongs
Casing Tongs
  Drill Pipe Tongs
  Hydraulic Power Units
  Automated Tong Positioning
  Accessories
Email Eckel Print this page Request Quote Add to Favorites Descrease Font Size Increase Font Size
  Home > Products > Casing Tongs > 10-3/4 Heavy Duty


Eckel 10-3/4 Heavy Duty

Pivot Heads Cam Backup Coarse Tooth Dies Fine Tooth Dies Torque Control System  

When higher torque performance than 10-3/4 Standard is required, the Eckel 10-3/4 Heavy Duty provides the performance you need. Model 10-3/4 Heavy Duty is always in demand where rig floor space is at a minimum. For pipe sizes from 4 to 10-3/4 inches, it delivers a stout 25,000 ft-lb of available torque.

10-3/4 Heavy Duty
Tong Specifications
Capacity 4 - 10-3/4 in. (101.6 - 273.1 mm)
Dimensions 32-1/2 x 63-1/2 in. (825.5 x 1612.9 mm)
Weight[1] 1,400 lb (635.0 kg)
Maximum Torque @ 2,500 psi (172 bar)
High 4,300 ft-lb (5830 Nm)
Low 25,000 ft-lb (33895 Nm)
Maximum RPM @ 65 GPM (246 LPM)
High 88 rpm
Low 15 rpm
Gear Ratio:
High 14.64:1
Low 84.85:1
Handle Length 36 in. (914.4 mm)
Backup Specifications
Backup Type Hydraulic Cam Backup
Capacity 4 - 11-3/4 in. (101.6 - 298.5 mm)
Dimensions[2] 41-1/2 x 64-1/2 in. (1054.1 x 1638.8 mm)
Weight [1][2] 2,800 lb (1270.1 kg)
Handle Length [2] 36 in. (914.4 mm)

[1] Weight Approximate
[2] Tong and Backup


Rollover to Zoom or Click to Enlarge